Ultra-Lightweight 1-Person Tent - LIGHT KNIGHT EXO UL 1
This ultra-light 1-person tent is ideal for the adventurous camper who appreciates the ergonomics and fine design of a camping tent.
MORE INFO ON THE ULTRA LIGHTWEIGHT 1-PERSON TENT - LIGHT KNIGHT EXO UL 1
Made from a single piece of 20 denier nylon, the floor of the living area of this solo tent has been covered with thin, superimposed waterproof layers, reducing its weight and preventing leaks.
The shape of the double roof of this individual tent, designed to create a gap between the waterproof canvas and the living space, creates adjustable ventilation flaps on the sides to properly control the airflow inside.
Its Y-shaped aluminum frame is quick and easy to set up, and its aerodynamic design makes it highly resistant to gusts of wind. The height of its domed interior provides ample room to sit comfortably inside. Without a doubt, it's the ideal one-person tent for the solo camper!
- Ultra-light tent
- Vestibule
- Roof waterproofing index of 3000 mm
- Adjustable ventilation system
- Sealed seams
- Aluminum rods and corner fixings
FEATURES
| Net weight | 1.5 kg |
|---|---|
| Ideal for | Solo camping, Adventure camping |
|
Capacity
|
1 person |
| Door(s) | 1 door |
| Vestibule(s) | 1 vestibule |
| Interior fabric | Ultra-lightweight fine-mesh nylon |
| Floor fabric | Nylon 20D 400T - Silicon fabric |
|
Floor waterproofness
|
4000 mm |
| Fly fabric | Nylon 20D 400T - Silicon fabric |
|
Fly waterproofness
|
3000 mm |
| Type of hoops | 7001 Series Aluminum |
| Packed size | 39 x 12 cm |
|
Floor length
|
2.15 m |
|
Floor width at the entrance
|
1.10 m |
| Rear floor width | 0.72 m |
| Interior height | 1 m |
| Depth of the vestibules | 0.6 m |
First, note that sealing the seams of the Lanshan with silicone sealant is only necessary for the Pro version, specifically the Lanshan 1 Pro or Lanshan 2 Pro . If you purchase a non-Pro version, such as the Lanshan 1 or Lanshan 2, you do not need to apply glue because the seams on these models have been factory-glued and offer high-performance waterproofing.
The necessary supplies to waterproof the seams of the Lanshan 1 Pro
The essentials:
- The syringe supplied with your Lanshan 1 Pro
- A tube of GearAid SeamGrip silicone glue
Inside the packaging of your Lanshan 1 Pro ultralight tent, you'll find a small syringe; this is the best tool for applying the silicone sealant. Using it correctly isn't the easiest task, but the result will be much better than applying it with a brush or your finger.
If you are in Canada or France, you can easily purchase GearAid SeamGrip silicone sealant on Amazon. It's a reliable sealant that doesn't dry quickly, making it easy to apply.
Caution: The official instructions for this product recommend applying the glue to tent seams using the small brush. The Lanshan manufacturer suggests using the syringe included with the Lanshan 1 Pro. Applying the glue with the brush is not recommended as it is very difficult to use, and in the end, your beautiful tent might look like this:
Steps to waterproof the Lanshan 1 Pro
To clearly visualize the steps and understand how to use the syringe provided with the Lanshan 1 Pro , you can watch the video below, captured by Justin Whiting.
- First, you must set up the tent outside before applying the coating. Make sure it is securely fastened and taut.
- Next, squeeze the glue into the syringe.
- Before sealing, make sure you clearly identify the areas where it is necessary. In the following image, areas requiring waterproofing are marked in red, optional sealing areas are marked in yellow, and areas that do not need to be sealed are marked in black.
- The operation must be carried out from top to bottom. Hold the syringe in one hand, and with the other, hold the canvas for stability. Apply the glue evenly along the seams. On the seams of the black UHMWPE patch area, to form a thin layer of glue over the seam, spread the glue with your finger after application. Don't forget to wipe your finger!
- Once all the seams are sealed, don't rush to pack the tent. Depending on the strength of the glue you purchased, you'll need to let it dry for 1 to 12 hours.
In conclusion, if you believe you are not skilled enough or a perfectionist enough to carry out this job, you can choose to seal only the red areas, so that Lanshan 1 Pro can still withstand storms.
